-
Ammonium Polyphosphate Flame Retardant
-
Intumescent Flame Retardant
-
Halogen Free Flame Retardant
-
Fabric Flame Retardant
-
APP Ammonium Polyphosphate
-
Wood Flame Retardant
-
PP Flame Retardant
-
Additives For Adhesives And Sealants
-
Water Based Fire Retardant
-
Paper Fire Retardant
-
PU Flame Retardant
-
Halogen Free Fire Retardants
-
AP422 CROS484 Equal Type
TF-251 Phosphorus Nitrogen Flame Retardant for Polyethylenes
Contact me for free samples and coupons.
Whatsapp:0086 18588475571
Wechat: 0086 18588475571
Skype: sales10@aixton.com
If you have any concern, we provide 24-hour online help.
xDescription | Ammonium Polyphosphate | Environmentally | Non-toxic, Low Smoke Production |
---|---|---|---|
Efficiency | High Efficiency | Base | Phosphorus Nitrogen |
Type | Intumescent | ||
Highlight | Phosphorus Nitrogen Flame Retardant,Flame Retardant for Polyethylenes,TF-251 Flame Retardant |
Halogen Free Flame Retardant of Phosphorus Nitrogen Flame Retardant for Polyethylenes
Polyethylenes are the most widely used commodity polymers with a high potential of value-adding via proper formulation development. Increasing amounts of PEs are nowadays used in electrical appliances, wires, and cables, building pipes, roofing, etc., because of their mechanical durability, good chemical resistance, low density, no toxicity, good electrical insulation, and excellent processability. However, PEs are among the most flammable materials with the high heat of combustion, low limited oxygen index (LOI), and high heat release, leaving little or no residual char. Phosphorus– and nitrogen-based compounds, including intumescent flame retardant systems (IFRs), present a viable alternative. IFRs play an effective role, mainly through a condensed-phase mechanism forming a carbonaceous foam residue (swollen char) on the surface of the polymer that acts as a heat insulator and physical barrier to the transport of oxygen and pyrolysis products.
TF-251 is a new type of environment-friendly flame retardants with P-N synergies, which is suitable for polyolefin, thermoplastic elastomer and so on.
Index
N content % ≥23%
P content % ≥19%
Moisture content% ≤0.2%
Whiteness(R457) ≥90.0
Bulk density(g/cm3) About 0.42
TGA (on set) ≥240℃
Particle size (D50) About 15µm
Proposed dosage
material homo-polypropylene co-polypropylene PE TPV
TF-251% 19-21 22-25 23-25 45-50
UL-94 V-0 V-0 V-0 V-0
Package & storage:25kg/bag;general chemical product(s), please keep it in a cool dry place below 25 ℃, avoid direct sunlight.